Get your files as below link
Dowload link
Get your files as below link
Dowload link
24V
120W
5A
3 x 320-575 Vac (3-Phase) or 2 x 340-575 Vac (2-Phase)
124 x 38 x 125.3 mm
4.88” x 1.50” x 4.93”
0.54 kg (1.19 lb)
24V
120W
5A
3 x 320-575 Vac (3-Phase) or 2 x 340-575 Vac (2-Phase)
124 x 38 x 125.3 mm
4.88” x 1.50” x 4.93”
0.54 kg (1.19 lb)
Output Current
5A
|
Output Voltage
24V
|
Output Voltage Range
|
Output Voltage Adjustment Range
24-28 Vdc
|
Output Power
120W
|
Output Current Adjustment Range
|
Max Output Voltage
|
Buffering Time
-
|
Line Regulation
< 40 mV (@ 3 x 320-575 Vac input, 100% load)
|
Load Regulation
< 100 mV (@ 3 x 320-575 Vac input, 0-100% load)
|
PARD
< 100 mVpp
|
Start-up Time
500 ms typ. @ nominal input (100% load)
|
Hold-up Time
20 ms typ. @ 3 x 400 Vac (100% load)
40 ms typ. @ 3 x 500 Vac (100% load) |
Dynamic Response (Overshoot & Undershoot O/P Voltage)
± 5% @ 3 x 320-575 Vac input, 0-100% load (Slew Rate: 0.1 A/μs, 50% duty cycle @ 5 Hz to 1 kHz)
|
Start-up with Capacitive Loads
10,000 µF Max
|
Remote ON/OFF
-
|
Protective Device
-
|
Voltage Drop Between Input and Output
-
|
Residual Ripple/PARD (20MHz)
-
|
Residual Ripple
-
|
Max. Power
-
|
Ripple & Noise
-
|
LED System Voltage Range in CC Mode
-
|
Rise Time
50 ms typ. @ nominal input (100% load)
|
Power Boost Duration
-
|
Power Boost Recovery Time
-
|
Nominal Input Voltage
3 x 380-500 Vac
|
Input Voltage Range
3 x 320-575 Vac (3-Phase) or 2 x 340-575 Vac (2-Phase)
|
Max Input Voltage
-
|
Nominal Input Frequency
50-60 Hz
|
Input Frequency Range
47-63Hz
|
Nominal DC Input Voltage
|
DC Input Voltage Range
450-800 Vdc
|
Input Current
< 0.50 A @ 3 x 400 Vac,
< 0.40 A @ 3 x 500 Vac |
Input Power (Standby Mode)
-
|
Efficiency at 100% load
87.5% typ. @ 3 x 400 Vac & 3 x 500 Vac
|
Max Inrush Current
20 A typ. @ 3 x 400 Vac, 25 A typ. @ 3 x 500 Vac
|
Charging Time
-
|
Power Factor at 100% load
> 0.45 @ 3 x 400 Vac,
> 0.40 @ 3 x 500 Vac |
Leakage Current
< 3.5 mA @ 3 x 500 Vac
|
Nominal Current
-
|
Total Harmonic Distortion
-
|
Max Power Dissipation
0% load: < 3 W @ 3 x 400 Vac & 3 x 500 Vac
100% load: < 17 W @ 3 x 400 Vac & 3 x 500 Vac |
Efficiency @ 10% load
-
|
Case Chassis / Cover
Aluminium
|
|
Indicator
Green LED DC OK
|
|
Cooling System
Convection
|
|
Input Terminal
4 Pins (Rated 600 V / 30 A)
|
|
Output Terminal
4 Pins (Rated 600 V / 30 A)
|
|
Signal Terminal
2 Pins (Rated 300 V / 12 A)
|
|
Noise Sound Pressure Level (SPL)
< 25 dBA
|
|
Input/Output Terminal
-
|
|
Signal
-
|
|
Mounting Rail
Standard TS35 DIN Rail in accordance with EN 60715
|
|
Wire
Input: AWG 18-10
Output: AWG 18-10 Signal: AWG 20-16 |
|
Protection Structure
-
|
|
Terminal
-
|
|
Unit Weight
0.54 kg (1.19 lb)
|
Dimensions
124 x 38 x
125.3 mm
4.88” x 1.50” x 4.93” |
Vibration (Operating)
IEC 60068-2-6, Sine Wave: 10-500 Hz; 3G peak; 60 min per axis for all X, Y, Z directions
|
Shock Test (Operating)
-
|
Operating Temperature
3-Phase
-25°C to +70°C (-40°C Cold Start) 2-Phase -25°C to +60°C (-40°C Cold Start) |
Storage Temperature
-40°C to +85°C
|
Power De-rating
Vertical Mounting: > 55°C de-rate power by 3.33% / °C
Horizontal Mounting: > 40°C de-rate power by 2.5% / °C Input Voltage: 2-Phase < 2 x 380 Vac de-rate power by 0.5% / V |
Operating Humidity
5 to 95% RH (Non-Condensing)
|
Shock Test (Non-Operating)
IEC 60068-2-27, Half Sine Wave: 50 G for duration of 11 ms; 3 times per direction
|
Vibration (Non-Operating)
-
|
Storage Humidity
-
|
Operating Altitude
OVC III
0 to 2,500 Meters (8,200 ft.) OVC II 2,500 to 6,000 Meters (19,680 ft.) 0 to 5,000 Meters (16,400 ft.) |
Pollution Degree
2
|
Bump Test (Operating)
-
|
Over Voltage Category
IEC/EN 62477-1, EN 60204-1, IEC 62103
OVC III: 0 to 2,500 Meters (8,200 ft.) OVC II: 2,500 to 6,000 Meters (19,680 ft.) IEC/EN 62368-1, IEC/EN 61010 OVC II: 0 to 5,000 Meters (16,400 ft.) |
Corrosion
-
|
Overvoltage
< 35 V, Hiccup Mode, Non-Latching (Auto-Recovery)
|
Overload / Overcurrent
105 – 150% of rated load current, Auto-recovery
Continuous current limit Mode (Vo > 80%) |
Over Temperature
60°C-80°C Surrounding Air Temperature @ 100% load, Non-Latching (Auto-Recovery)
|
Short Circuit
Hiccup Mode, Non-Latching (Auto-Recovery when the fault is removed)
|
Reverse Polarity Protection
-
|
Degree of Protection
IP20
|
Protection Against Shock
Class I with Primary Earth connection
|
Input Polarity Protection
-
|
Battery Polarity Protection
-
|
Wrong Battery Voltage Protection
-
|
Deep Discharge Protection
-
|
Overload
-
|
Overcurrent
-
|
Internal Fuse
-
|
Insufficient Input Voltage Protection
-
|
MTBF
Telcordia SR-332: > 700,000 hrs.
I/P: 3 x 400 Vac & 3 x 500 Vac, O/P: 100% load, Ta: 25°C |
Expected Cap Life Time
10 Years
I/P: 3 x 400 Vac & 3 x 500 Vac, O/P: 24 V, 2.5 A, Ta: 40°C |
Safety Certificate
-
|
Electrical Safety
SIQ Bauart: EN 62368-1, EN 61010-1, EN 61010-2-201, EN 62477-1
UL/cUL recognized: UL 62368-1 and CSA C22.2 No. 62368-1 (File No. E191395) CB scheme: IEC 60950-1, IEC 62368-1, IEC 61010-1, IEC 61010-2-201 UKCA: BS EN 62368-1, BS EN 61010-1, BS EN 61010-2-201 |
CE
In conformance with EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU
|
Medical Safety
-
|
Galvanic Isolation
Input to Output: 4.0 kVac
Input to Ground: 2.0 kVac Output to Ground: 1.5 kVac DC OK relay contact to Output: 0.5 kVac DC OK relay contact to Ground: 1.5 kVac |
Industrial Control Equipment
-
|
Hazardous Location / ATEX
-
|
II 3 G ATEX 2014/34/EU
-
|
Electrical Equipments of Machines
EN/BS EN 60204-1 (over voltage category III)
|
Electrical Equipment for Use in Electrical Power Installations
IEC/EN/BS EN 62477-1 / IEC 62103
|
Safety Entry Low Voltage
SELV (IEC 60950-1)
|
Maritime
-
|
Material and Parts
-
|
Isolation Resistance
-
|
PE Resistance
-
|
UKCA
In conformance with Electrical Equipment (Safety) Regulations 2016 No. 1011 and The Electromagnetic Compatibility Regulations 2016 No. 1091
|
Certificates for Other Countries
-
|
BIS
-
|
KC
-
|
Electrical Equipment for Measurement, Control, and Laboratory Use
UL 61010-1, UL 61010-2-201 (File No. E315355)
|
ITE Safety
-
|
SIL3
-
|
Emission
(CE & RE)
Generic Standards: EN/BS EN 61000-6-3, CISPR 32, EN/BS EN 55032, KS C 9832, FCC Title 47: Class B |
Immunity
Generic Standards: EN/BS EN 55024, EN/BS EN 55035, KS C 9835, EN/BS EN 61000-6-1
|
Harmonic Current Emissions
IEC/EN/BS EN 61000-3-2, Class A
|
Voltage Fluctuation and Flicker
IEC/EN/BS EN 61000-3-3
|
ESD Immunity
-
|
Radiated Immunity
-
|
EFT
-
|
Surge
-
|
Conducted Immunity
-
|
Magnetic Field
-
|
Voltage Dips
-
|
Component Power Supply for General Use
EN/BS EN 61204-3
|
48V
240W
5A
90-264 Vac
24V
960W
40A
3 x 320-575 Vac
24V
120W
5A
90-264 Vac
24V
480W
20A
90-264 Vac
Subscribe to DeltaPSU newsletter and be the first to know about our new product releases and industry knowledge. Read our Privacy Policy.
DeltaPSU will use the information you provide on this form to be in touch with you.
To unsubscribe, click the link in our newsletter. We will treat your data with respect.