Get your files as below link
Dowload link
Get your files as below link
Dowload link
48V
200W
4.17A
85-305Vac
127.6 x 76.2 x 34.8 mm
5.02” x 3.00” x 1.37”
0.42 kg (0.93 lb)
48V
200W
4.17A
85-305Vac
127.6 x 76.2 x 34.8 mm
5.02” x 3.00” x 1.37”
0.42 kg (0.93 lb)
Output Current
4.17A
|
Output Voltage
48V
|
Output Voltage Range
|
Output Voltage Adjustment Range
48-50Vdc
|
Output Power
200W
|
Output Current Adjustment Range
|
Max Output Voltage
|
Buffering Time
-
|
Line Regulation
± 1% typ. (@ 100-277Vac input, 100% load)
|
Load Regulation
± 2% typ. (@ 100-277Vac input, 0-100% load)
|
PARD
< 480mVpp
20MHz, warm up for 10mins |
Start-up Time
< 500ms @ 100Vac & 240Vac (100% load), With and without capacitive loads
|
Hold-up Time
> 5ms @ 115Vac & 230Vac (100% load)
|
Dynamic Response (Overshoot & Undershoot O/P Voltage)
± 5% @ 100-305Vac input, 0-50% load & 50-100% load & 0-100% load (Slew Rate: 2.5A/μS, 50% duty cycle @ 5Hz, 50Hz, 1KHz)
|
Start-up with Capacitive Loads
680μF Max
|
Remote ON/OFF
-
|
Protective Device
-
|
Voltage Drop Between Input and Output
-
|
Residual Ripple/PARD (20MHz)
-
|
Residual Ripple
-
|
Max. Power
-
|
Ripple & Noise
-
|
LED System Voltage Range in CC Mode
-
|
Rise Time
< 100ms @ nominal input (100% load)
|
Power Boost Duration
-
|
Power Boost Recovery Time
-
|
Nominal Input Voltage
100-277Vac
|
Input Voltage Range
85-305Vac
|
Max Input Voltage
-
|
Nominal Input Frequency
50-60Hz
|
Input Frequency Range
47-63Hz
|
Nominal DC Input Voltage
|
DC Input Voltage Range
-
|
Input Current
< 2.20A @ 115Vac
|
Input Power (Standby Mode)
-
|
Efficiency at 100% load
> 85% @ 115Vac, > 90% @ 230Vac
|
Max Inrush Current
< 20A @ 230Vac ((Cold Start))
|
Charging Time
-
|
Power Factor at 100% load
> 0.95 @ 115Vac & 230Vac
|
Leakage Current
< 500μA, According to CSA C22.2 No. 166 and UL8750 edition 2nd
|
Nominal Current
-
|
Total Harmonic Distortion
-
|
Max Power Dissipation
No Load: < 0.7W @ 230Vac
100% Load: < 22.2W @ 230Vac |
Case Chassis / Cover
-
|
|
Indicator
NA
|
|
Cooling System
Convection: 0-150W
Fan Cool: 151-200W With 400 LFM fan cool, 15mm distance between PSU and fan |
|
Input Terminal
-
|
|
Output Terminal
-
|
|
Signal Terminal
-
|
|
Noise Sound Pressure Level (SPL)
Sound Pressure Level (SPL) < 25dBA
|
|
Input/Output Terminal
-
|
|
Signal
-
|
|
Mounting Rail
-
|
|
Wire
-
|
|
Protection Structure
-
|
|
Terminal
-
|
|
Unit Weight
0.42 kg (0.93 lb)
|
Dimensions
127.6 x 76.2 x
34.8 mm
5.02” x 3.00” x 1.37” |
Vibration (Operating)
-
|
Shock Test (Operating)
-
|
Operating Temperature
-40°C to +70°C
|
Storage Temperature
-40°C to +85°C
|
Power De-rating
-
|
Operating Humidity
5 to 95% RH (Non-Condensing)
|
Shock Test (Non-Operating)
IEC 60068-2-27, Half Sine 50G for a duration of 11ms, 3 times per direction, 9 times in total
|
Vibration (Non-Operating)
IEC 60068-2-6, 10Hz to 150Hz @ 25m/S² (2.5G peak); displacement of 0.35mm; 90 min per axis for all X, Y, Z direction
|
Storage Humidity
-
|
Operating Altitude
0 to 5,000 Meters (16,400 ft.)
|
Pollution Degree
2
|
Bump Test (Operating)
-
|
Over Voltage Category
II
|
Overvoltage
< 60V, SELV Output, Latch Mode
|
Overload / Overcurrent
> 105% of rated load current, Hiccup mode, Non-Latching (Auto recovery)
|
Over Temperature
Latch Mode
|
Short Circuit
Hiccup Mode, Non-Latching (Auto-Recovery when the fault is removed)
|
Reverse Polarity Protection
-
|
Degree of Protection
-
|
Protection Against Shock
Class I with Primary Earth connection
|
Input Polarity Protection
-
|
Battery Polarity Protection
-
|
Wrong Battery Voltage Protection
-
|
Deep Discharge Protection
-
|
Overload
-
|
Overcurrent
-
|
Internal Fuse
-
|
Insufficient Input Voltage Protection
-
|
MTBF
> 500,000 hrs. as per Telcordia SR-332 I/P: 115Vac, O/P: 100% load, Ta: 25°C
|
Expected Cap Life Time
10 years (115Vac & 230Vac, 50% load @ 40°C)
|
Safety Certificate
-
|
Electrical Safety
SIQ Bauart: EN 62368-1
cCSAus: CSA C22.2 No. 250.13 and UL 8750 CSA C22.2 No. 60950-1 and UL 60950-1 CSA C22.2 No. 62368-1 and UL 62368-1 CB scheme: IEC 60950-1, IEC 62368-1, IEC 61347-1 and IEC 61347-2-13 |
CE
In conformance with EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU
|
Medical Safety
-
|
Galvanic Isolation
Input to Output 4kVac (Reinforced)
3kVac (Production Test) Input to Ground 1.5kVac (Basic & Production Test) Output to Ground 1.5kVac (Basic) |
Industrial Control Equipment
-
|
Hazardous Location / ATEX
-
|
II 3 G ATEX 2014/34/EU
-
|
Electrical Equipments of Machines
-
|
Electrical Equipment for Use in Electrical Power Installations
-
|
Safety Entry Low Voltage
SELV (IEC 60950-1)
|
Maritime
-
|
Material and Parts
-
|
Isolation Resistance
-
|
PE Resistance
-
|
UKCA
In conformance with Electromagnetic Compatibility Regulations 2016 and Electrical Equipment (Safety) Regulations 2016
|
Certificates for Other Countries
-
|
BIS
-
|
KC
-
|
Emission
Generic Standards: CISPR 32, EN/BS EN 55032: Class B
|
Immunity
Generic Standards: EN/BS EN 55024, EN/BS EN 55035
|
Harmonic Current Emissions
IEC/EN/BS EN 61000-3-2, Class C
|
Voltage Fluctuation and Flicker
IEC/EN/BS EN 61000-3-3 at nominal voltages and full load
|
ESD Immunity
-
|
Radiated Immunity
-
|
EFT
-
|
Surge
-
|
Conducted Immunity
-
|
Magnetic Field
-
|
Voltage Dips
-
|
Component Power Supply for General Use
-
|
12V
600W
-
90-264 Vac
24V
120W
5A
90-264 Vac
12V
200W
-
90-264 Vac
12V
114W
9.5A
90-264 Vac
Subscribe to DeltaPSU newsletter and be the first to know about our new product releases and industry knowledge. Read our Privacy Policy.
DeltaPSU will use the information you provide on this form to be in touch with you.
To unsubscribe, click the link in our newsletter. We will treat your data with respect.