Get your files as below link
Dowload link
Get your files as below link
Dowload link
24V
96W
4A
108-305Vac
241.3 x 43.1 x 30 mm
9.50” x 1.70” x 1.18”
0.56 kg (1.23 lb)
24V
96W
4A
108-305Vac
241.3 x 43.1 x 30 mm
9.50” x 1.70” x 1.18”
0.56 kg (1.23 lb)
Output Current
4A
|
Output Voltage
24V
|
Output Voltage Range
|
Output Voltage Adjustment Range
-
|
Output Power
96W
|
Output Current Adjustment Range
|
Max Output Voltage
25.6Vdc
|
Buffering Time
-
|
Line Regulation
± 1%
|
Load Regulation
± 3%
|
PARD
-
|
Start-up Time
< 1.0s
|
Hold-up Time
-
|
Dynamic Response (Overshoot & Undershoot O/P Voltage)
-
|
Start-up with Capacitive Loads
-
|
Remote ON/OFF
-
|
Protective Device
-
|
Voltage Drop Between Input and Output
-
|
Residual Ripple/PARD (20MHz)
-
|
Residual Ripple
-
|
Max. Power
-
|
Ripple & Noise
-
|
LED System Voltage Range in CC Mode
-
|
Rise Time
< 50ms
|
Power Boost Duration
-
|
Power Boost Recovery Time
-
|
Nominal Input Voltage
120-277Vac
|
Input Voltage Range
108-305Vac
|
Max Input Voltage
-
|
Nominal Input Frequency
50-60 Hz
|
Input Frequency Range
47-63Hz
|
Nominal DC Input Voltage
|
DC Input Voltage Range
-
|
Input Current
0.91 typ.
|
Input Power (Standby Mode)
-
|
Efficiency at 100% load
90% typ.
|
Max Inrush Current
70A/ 200us
|
Charging Time
-
|
Power Factor at 100% load
> 0.95
|
Leakage Current
< 0.7mA @ 230Vac
|
Nominal Current
-
|
Total Harmonic Distortion
-
|
Max Power Dissipation
-
|
Efficiency @ 10% load
-
|
Case Chassis / Cover
Metal sheet
|
|
Indicator
-
|
|
Cooling System
Convection
|
|
Input Terminal
Line: Black, Neutral: White, Wire Length 317mm
|
|
Output Terminal
Positive: Red, Negative: Black, Wire Length 317mm
|
|
Signal Terminal
-
|
|
Noise Sound Pressure Level (SPL)
< 24dBA
|
|
Input/Output Terminal
-
|
|
Signal
-
|
|
Mounting Rail
-
|
|
Wire
-
|
|
Protection Structure
-
|
|
Terminal
-
|
|
Unit Weight
0.56 kg (1.23 lb)
|
Dimensions
241.3 x 43.1 x
30 mm
9.50” x 1.70” x 1.18” |
Vibration (Operating)
-
|
Shock Test (Operating)
-
|
Operating Temperature
-40°C to +55°C
|
Storage Temperature
-40°C to +85°C
|
Power De-rating
-
|
Operating Humidity
10 to 90% RH (Non-Condensing)
|
Shock Test (Non-Operating)
-
|
Vibration (Non-Operating)
-
|
Storage Humidity
5 to 95% RH (Non-Condensing)
|
Operating Altitude
< 2,000m
|
Pollution Degree
-
|
Bump Test (Operating)
-
|
Over Voltage Category
-
|
Overvoltage
Auto-Recovery when the fault is removed
|
Overload / Overcurrent
Auto-Recovery when the fault is removed
|
Over Temperature
Auto-Recovery when the fault is removed
|
Short Circuit
Auto-Recovery when the fault is removed
|
Reverse Polarity Protection
-
|
Degree of Protection
-
|
Protection Against Shock
-
|
Input Polarity Protection
-
|
Battery Polarity Protection
-
|
Wrong Battery Voltage Protection
-
|
Deep Discharge Protection
-
|
Overload
-
|
Overcurrent
-
|
Internal Fuse
-
|
Insufficient Input Voltage Protection
-
|
MTBF
50,000 hrs. at lifetime case temperature
|
Expected Cap Life Time
850,000 hrs. @ta: +45°C (as per Telcordia SR-332 , total failure rate less than 10% )
|
Safety Certificate
-
|
Electrical Safety
UL: UL 8750, Class P, type “HL”. Class 2 Output
CSA: CAN/CSA C22.2 No.250.13 CB scheme: IEC 61347-1, IEC 61347-2-13, IEC 60335-1, IEC 60335-2-89 and Annex BB, IEC 60335-2-24 and Annex CC, SELV Output CCC: GB 17625.1-2012, GB/T 17743-2017, GB 19510.1-2009, GB 19510.14-2009 |
CE
In conformance with :
Low Voltage Directive 2014/35/EU ; EMC Directive 2014/30/EU ; RoHS Directive 2011/65/EU+ (EU) 2015/863 and Erp Directive 2009/125/EC Implementing measure Commission Regulation (EU) 2019/2020. |
Medical Safety
-
|
Galvanic Isolation
-
|
Industrial Control Equipment
-
|
Hazardous Location / ATEX
-
|
II 3 G ATEX 2014/34/EU
-
|
Electrical Equipments of Machines
-
|
Electrical Equipment for Use in Electrical Power Installations
-
|
Safety Entry Low Voltage
-
|
Maritime
-
|
Material and Parts
-
|
Isolation Resistance
-
|
PE Resistance
-
|
UKCA
-
|
Certificates for Other Countries
-
|
BIS
-
|
KC
-
|
Electrical Equipment for Measurement, Control, and Laboratory Use
-
|
ITE Safety
-
|
Emission
Emissions (CE & RE)
Compliance to EN 55015 & FCC Part 15 Class A |
Immunity
Compliance to EN 61547
|
Harmonic Current Emissions
IEC 61000-3-2
|
Voltage Fluctuation and Flicker
IEC 61000-3-3
|
ESD Immunity
IEC 61000-4-2
|
Radiated Immunity
IEC 61000-4-3
|
EFT
IEC 61000-4-4
|
Surge
IEC 61000-4-5
ANSI C62.41 |
Conducted Immunity
IEC 61000-4-6
|
Magnetic Field
IEC 61000-4-8
|
Voltage Dips
IEC 61000-4-11
|
Component Power Supply for General Use
-
|
12V
20W
1.7A
90-305Vac
360V
1500W
1.4A
198-440Vac
12V
100W
8.3A
90-305Vac
150-300V
600W
1-3A
108-305Vac
Subscribe to DeltaPSU newsletter and be the first to know about our new product releases and industry knowledge. Read our Privacy Policy.
DeltaPSU will use the information you provide on this form to be in touch with you.
To unsubscribe, click the link in our newsletter. We will treat your data with respect.