PMU-27V155WCCA

Panel Mount

PMU Series

PMU-27V155WCCA

Output Voltage

27.6V

Output Power

151W

Output Current

4A,1.5A

Input Voltage Range

90-132Vac, 180-264Vac (Selectable by Switch)

Dimensions (L x W x H)

178 x 97 x 38 mm

7.01” x 3.82” x 1.50”

Unit Weight

0.60 kg (1.32 lb)

Highlights & Features

AC input voltage range selectable by switch
LED indicators for DC OK (Green) and Battery Reverse Polarity Connection (Red)
Zero switch-over time from loss of AC, to battery operation
Conforms to harmonic current IEC/EN 61000-3-2, Class A
High MTBF > 700,000 hrs per Telcordia SR-332
Monitoring Signals for AC OK, DC OK and Battery Low indication
Overvoltage / Overcurrent / Over temperature / Short circuit protections
Built-in over current and short circuit protection in Buffering (battery discharging) mode operation
Certified according to IEC/EN/UL 62368-1

Applications

Download

Datasheet

Uploaded on 03-Nov-2021

Manual

Uploaded on 26-Aug-2021

Image

Uploaded on 03-Nov-2021

Mechanical Drawing

Uploaded on 22-Apr-2020

.DXF

Uploaded on 22-Apr-2020

.STP

Uploaded on 22-Apr-2020

Certificates

BIS

Uploaded on 03-Nov-2021

Uploaded on 07-Dec-2020

CCC

Uploaded on 17-Feb-2022

Uploaded on 07-Dec-2020

EAC

Uploaded on 22-Apr-2020

REACH

Uploaded on 07-Sep-2023

RoHS

Uploaded on 07-Sep-2023

SIQ

Uploaded on 07-Dec-2020

TSCA

Uploaded on 15-Nov-2023

UKCA

Uploaded on 03-Nov-2021

Uploaded on 07-Dec-2020

GUI Software

Tech Specs

Output Current

4A,1.5A

Output Voltage

27.6V

Output Voltage Adjustment Range

24-28Vdc

Output Power

151W

Line Regulation

< 0.5% (90-132Vac @ 90% load,180-264Vac @ 100% load)

Load Regulation

< 1.0% (90-132Vac @ 0-90% load,180-264Vac @ 0-100% load)

PARD

< 150mVpp @ 0°C to -20°C
< 100mVpp @ > 0°C to 70°C

Start-up Time

< 1,000ms (115Vac @ 90% load, 230Vac @ 100% load)

Hold-up Time

> 20ms (115Vac @ 90% load, 230Vac @ 100% load)

Dynamic Response (Overshoot & Undershoot O/P Voltage)

± 5%, 0-50% & 50-100% & 10-100% load
(Slew Rate: 0.1A/μS, 50% duty cycle @ 5Hz to 1KHz)

Start-up with Capacitive Loads

3,600μF at 27.6V/5.5A

Voltage Drop Between Input and Output

Normal Mode: 0.5V typ.
Buffering Mode: 0.2V typ.

Rise Time

< 50ms (100Vac @ 90% load, 200Vac @ 100% load)

Nominal Input Voltage

100-120Vac, 200-240Vac (Selectable by Switch)

Input Voltage Range

90-132Vac, 180-264Vac (Selectable by Switch)

Nominal Input Frequency

50-60Hz

Input Frequency Range

47-63Hz

Input Current

< 2.5A @ 115Vac, < 1.5A @ 230Vac

Efficiency at 100% load

> 85.0% @ 115Vac
> 86.0% @ 230Vac

Max Inrush Current

(Cold Start)
< 25A @ 115Vac & 230Vac

Leakage Current

< 0.5mA @ 264Vac

Max Power Dissipation

No Load: < 0.4W @ 115Vac, < 0.5W @ 230Vac
100% Load: < 23W @ 115Vac & 230Vac

Case Chassis / Cover AL / SGCC
Indicator LED Indicator: Green LED: DC OK Red LED: Battery Connected in Reverse Polarity
Cooling System Convection
Input Terminal -
Output Terminal -
Signal Terminal -
Noise Sound Pressure Level (SPL) -
Input/Output Terminal -
Signal -
Mounting Rail -
Wire -
Protection Structure -
Terminal -
Unit Weight 0.60 kg (1.32 lb)	Dimensions 178 x 97 x 38 mm 7.01” x 3.82” x 1.50”

Operating Temperature

-20°C to +70°C

Storage Temperature

-40°C to +85°C

Power De-rating

I/P: 90-132Vac:
< 0°C to -20°C de-rate power by 2.25% / °C
50°C to 70°C de-rate power by 2.25% / °C
I/P: 180-264Vac:
< 0°C to -20°C de-rate power by 2.5% / °C
50°C to 70°C de-rate power by 2.5% / °C

Operating Humidity

5 to 95% RH (Non-Condensing)

Shock Test (Non-Operating)

IEC 60068-2-27, 30G (300m/S²) for a duration of 18ms,3 times per direction, 9 times in total

Vibration (Non-Operating)

IEC 60068-2-6, 10Hz to 150Hz @ 50m/S² (5G peak); displacement of 0.35mm; 20 min per axis for all X, Y, Z direction

Operating Altitude

0 to 5,000 Meters (16,400 ft.)

Pollution Degree

Bump Test (Operating)

IEC 60068-2-29, 10G (100m/S²) for a duration of 11ms,1000 times per direction, 3000 times in total

Over Voltage Category

Overvoltage

V1: <37.0V, SELV Output, Hiccup mode, Non-latching (auto-recovery)
B+: 30Vdc Max will not cause damage to the unit

Overload / Overcurrent

Normal Mode: 105-150% of rated load current, Hiccup mode, Non-Latching (Auto recovery)
Buffering Mode: 6.05-11.0A, Latch mode

Over Temperature

Latch mode

Short Circuit

Normal Mode: Hiccup Mode, Non-Latching (Auto-recovery when the fault is removed)
Buffering Mode: Latch mode

Protection Against Shock

Class I with Primary Earth connection

Battery Polarity Protection

Yes (RED LED = ON)

Wrong Battery Voltage Protection

Yes, 30Vdc Max will not cause damage to the unit

Deep Discharge Protection

18.0V ± 0.5V

MTBF

> 700,000 hrs. as per Telcordia SR-332
I/P: 115Vac, Ta: 25°C
O/P: 13.8V/9.9A for 13V model and 27.6V/4.95A for 27V model

Expected Cap Life Time

10 years (115Vac & 230Vac, 50% load @ 40°C)

Electrical Safety

SIQ Bauart: EN 60950-1, EN 62368-1
UL/cUL recognized: UL 60950-1 and CSA C22.2 No. 60950-1, UL 62368-1 and CSA C22.2 No. 62368-1
CCC: GB 9254, GB 17625.1 and GB 4943.1
CB scheme: IEC 60950-1, IEC 62368-1

In conformance with EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU

Galvanic Isolation

Input to Output: 3.0 KVac
Input to Ground: 1.5 KVac
Output to Ground: 0.5 KVac

Safety Entry Low Voltage

SELV (IEC 60950-1)

UKCA

In conformance with Electrical Equipment (Safety) Regulations 2016 No. 1011 and
The Electromagnetic Compatibility Regulations 2016 No. 1091

BIS

IEC 60950-1, IS 13252 (Part 1)

Emission

Generic Standards: CISPR 22, CISPR 32, EN/BS EN 55022, EN/BS EN 55032, FCC Title 47: Class B

Immunity

Generic Standards: EN/BS EN 55024

Harmonic Current Emissions

IEC/EN/BS EN 61000-3-2, Class A, GB17625.1

Voltage Fluctuation and Flicker

IEC/EN/BS EN 61000-3-3

Nominal Battery Voltage

(Batteries not included with power supply)
24Vdc
SLA Sealed lead acid battery
2 x 12Vdc
SLA Sealed lead acid battery

Battery Voltage Range

Continuously Operating: 22.0 to 27.6Vdc (nominal at 24V)
Maximum Allowed Voltage: 32Vdc Max
Minimum Voltage: 16.5Vdc

Battery Capacity

3.3AH/ 7AH/ 12AH/ 15AH

Battery Charging Mode

(Normal Mode)
CC-CV mode (constant current-constant voltage) at 0 to 1.5A

End of Charge Voltage

The unit always charges battery to a fixed voltage value

(/3) Item(s) selected

PMU-27V155WCCA

Panel Mount

PMU Series

PMU-27V155WCCA

Output Voltage

Output Power

Output Current

Input Voltage Range

Dimensions (L x W x H)

Unit Weight

Highlights & Features

Tags

Applications

PMU-27V155WCCA

PMU-27V155WCCA

Panel Mount

PMU Series

PMU-27V155WCCA

Highlights & Features

Output Voltage

Output Power

Output Current

Input Voltage Range

Dimensions

Unit Weight

Applications

Tags

Download

Download

Tech Specs

Tech Specs

Looking for support for this product?

Looking for support for this product?

Related Products

PMR-48V240W1AT

Output Voltage

Output Power

Output Current

Input Voltage Range

Dimensions (L x W x H)

159 x 97 x 30 mm

6.26” x 3.82” x 1.18”

PMR-12V320W1AT

Output Voltage

Output Power

Output Current

Input Voltage Range

Dimensions (L x W x H)

215 x 115 x 30 mm

8.46” x 4.53” x 1.18”

PMR-24V240W1AT

Output Voltage

Output Power

Output Current

Input Voltage Range

Dimensions (L x W x H)

159 x 97 x 30 mm

6.26” x 3.82” x 1.18”

PMR-12V240W1AT

Output Voltage

Output Power

Output Current

Input Voltage Range

Dimensions (L x W x H)

159 x 97 x 30 mm

6.26” x 3.82” x 1.18”

Subscribe to our newsletter

Products

Applications

Selector

News & Events

About

Download

Supports

Information

Follow us on social

Subscribe to our newsletter