DIN Rail Power Supply

CliQ III

24V 120W / DRP-24V120W1CAN

Highlights & Features

  • Universal AC input voltage range
  • Built-in constant current circuit for charging application
  • High efficiency of up to 91% at 230Vac
  • Power Boost of 150% for 5 seconds
  • Advanced Power Boost (APB) of 200% for 50ms
  • SEMI F47 compliance at 120Vac
  • Extreme low temperature cold start at -40°C
  • Built-in DC OK Contact and LED indicator for DC OK
  • Conformal coating on PCBA to protect against common dust and chemical pollutants


Dimensions (L x W x D) : 
124 x 40 x 117 mm
4.88" x 1.57" x 4.61"
Unit Weight : 
0.58 kg (1.28 lb)
Nominal Output Voltage
24V
Output Current
5A
Output Voltage Adjustment Range
24-28Vdc
Output Power
120W
Line Regulation
< 0.5% Typ. (@ 200-550Vac input, 100% load)
Load Regulation
< 1% Typ. (@ 200-550Vac input, 0-100% load)
PARD
100mVpp Max.
Start-up Time
1,500ms Max. @ 24V, 5A
Hold-up Time
35ms Typ. @ 24V, 5A
20ms Min. @ 24V, 5A
Dynamic Response (Overshoot & Undershoot O/P Voltage)
± 5% @ 0-100% load
Start-up with Capacitive Loads
5,000µF Max.
Rise Time
60ms Max. @ 24V, 5A
Nominal Input Voltage
100-240Vac
Input Voltage Range
100-264Vac (Continuously operating)
88-100Vac (With power de-rating)
Nominal Input Frequency
50-60Hz
Input Frequency Range
47-63Hz
DC Input Voltage Range
100-375Vdc (Continuously operating, with safety approval according to IEC/EN/UL 60950-1)
88-100Vdc (With power de-rating)
Input Current
1.18A Typ. @ 115 Vac, 0.61A typ. @ 230Vac
Efficiency at 100% load
89.92% Typ. @ 115Vac, 91.49% Typ. @ 230Vac
Max Inrush Current
(Cold Start)
12.4A Typ. @ 115Vac, 25.6A Typ. @ 230Vac, 35A Max. @ 115Vac, 70A Max. @ 230Vac
Power Factor at 100% load
0.98 Typ. @ 115Vac, 0.95 Typ. @ 230Vac, 0.96 Min. @ 115Vac, 0.93 Min. @ 230Vac
Leakage Current
(Enclosure to Neutral)
< 0.20mA / 0.50mA: 110Vac, 50Hz, TN/TT system / IT system
< 0.24mA / 0.60mA: 132Vac, 50Hz, TN/TT system / IT system
< 0.47mA / 1.20mA: 264Vac, 50Hz, TN/TT system / IT system
Max Power Dissipation
At 24V, 0A: 3.31W Typ. @ 115Vac, 3.20W Typ. @ 230Vac, 5.0W Max. @ 115Vac, 5.0W Max. @ 230Vac
At 24V, 5A: 13.46W Typ. @ 115Vac, 11.16W Typ. @ 230Vac, 14.0W Max. @ 115Vac, 13.0W Max. @ 230Vac
Dimensions
124 x 40 x 117 mm
4.88" x 1.57" x 4.61"
Unit Weight
0.58 kg (1.28 lb)
Case Chassis / Cover
Aluminium
Indicator
Green LED (DC OK)
Cooling System
Convection
Operating Temperature
-25°C to +70°C (Cold start -40°C)
Storage Temperature
-40°C to +85°C
Power De-rating
Vertical Mounting: > 60°C de-rate power by 2.5% / °C
Horizontal Mounting: > 40°C de-rate power by 1.67% / °C
Input Voltage:
AC input
< 100Vac de-rate power by 0.83% / V
DC input
< 100Vdc de-rate power by 1.67% / V
Operating Humidity
5 to 95% RH (Non-Condensing)
Shock Test (Non-Operating)
IEC 60068-2-27, Half Sine Wave: 30G for a duration of 18ms; 3 times per direction, 9 times in total
Vibration Test (Non-Operating)
IEC 60068-2-6, Sine Wave: 10-500Hz; 3G peak; displacement of 0.35mm; 60 min per axis for all X, Y, Z directions
Operating Altitude
0 to 5,000 Meters (16,400 ft.)
Pollution Degree
2
Bump Test (Operating)
IEC 60068-2-29, Half Sine Wave: 10G for a duration of 11ms, 1,000 times per direction, 6,000 times in total
Over Voltage Category
III (operating altitude 2,500 Meters)
II (operating altitude 5,000 Meters)
According to IEC/EN 62477-1 / EN 60204-1 (clearance and creepage distances) and IEC 62103 (safety part)
Overvoltage
28.8 - 35.2V, SELV Output, Hiccup Mode, Non-Latching (Auto-Recovery)
Overload / Overcurrent
125 – 170% of rated load current, Constant current, Hiccup Mode (Auto-Recovery)
Over Temperature
< 80°C Surrounding Air Temperature @ 100% load, Non-Latching (Auto-Recovery)
Short Circuit
Hiccup Mode, Non-Latching (Auto-Recovery when the fault is removed): Load impedance ≤ 100mOhm
Degree of Protection
IP20
Protection Against Shock
Class I with Primary Earth connection
MTBF
1,411,300 hrs.: I/P: 115Vac, O/P: 24V, 5A, Ta: 25°C
842,900 hrs.: I/P: 115Vac, O/P: 24V, 5A, Ta: 40°C
Expected Cap Life Time
O/P: 24V, 5A, Ta: 25°C: 131,400hrs. @ 115Vac & 230Vac
O/P: 24V, 2.5A, Ta: 40°C: 131,400hrs. @ 115Vac & 230Vac
O/P: 24V, 5A, Ta: 60°C: 21,100hrs. @ 115Vac, 32,700hrs. @ 230Vac
O/P: 24V, 3.75A, Ta: 60°C: 29,700hrs.@ 115Vac, 47,300hrs. @ 230Vac
Electrical Safety
SIQ Bauart: EN 60950-1
UL/cUL recognized: UL 60950-1 and CSA C22.2 No. 60950-1 (File No. E191395)
CB scheme: IEC 60950-1
CE
In conformance with EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU
Galvanic Isolation
Input to Output: 4.0KVac
Input to Ground: 2.0KVac
Input to DC OK relay contact: 4.0KVac
Output to Ground: 1.5KVac
Output to DC OK relay contact: 0.5KVac
DC OK relay contact to PE: 1.5KVac
Industrial Control Equipment
UL/cUL listed: UL 508 and CSA C22.2 No. 107.1-01 (File No. E315355)
Electrical Equipments of Machines
EN 60204-1 (over voltage category III)
Electrical Equipment for Use in Electrical Power Installations
IEC/EN 62477-1 / IEC 62103
Safety Entry Low Voltage
PELV (EN 60204-1), SELV (EN 60950-1)
Material and Parts
RoHS Directive 2011/65/EU Compliant (EN 50581)
PE Resistance
< 0.1Ohm
Emission
(CE & RE)
Generic Standards: EN 61000-6-3
CISPR 32, EN 55032, CISPR 11, EN 55011, FCC Title 47: Class B
Immunity
Generic Standards: EN 55024, EN 61000-6-2
Harmonic Current Emissions
IEC/EN 61000-3-2, Class A
Voltage Fluctuation and Flicker
IEC/EN 61000-3-3
Component Power Supply for General Use
EN 61204-3

Documents

Datasheet Uploaded on 14-Dec-2018 1.5 MB
.DXF Uploaded on 27-Mar-2018 145 KB
Mechanical Drawing Uploaded on 27-Mar-2018 141 KB
.STP Uploaded on 27-Mar-2018 1.9 MB
Manual Uploaded on 27-Mar-2018 913 KB
Image Uploaded on 27-Mar-2018 345 KB

Certificates

CB Uploaded on 27-Mar-2018 2.1 MB
CE Uploaded on 27-Mar-2018 141 KB
EAC Uploaded on 28-Jul-2016 1.2 MB
REACH Uploaded on 18-Dec-2018 545 KB
RoHS Uploaded on 18-Dec-2018 380 KB
SIQ Uploaded on 27-Mar-2018 1.9 MB
UL Uploaded on 20-Dec-2017 68 KB

Related Products

CliQ II 24V 120W

DRP-24V120W2BN

Add to Comparison

Output Voltage

24V

Output Current

5A

Input Voltage

0-550 Vac

Dimensions

124 x 40 x 117 mm
4.88" x 1.57" x 4.61"

CliQ 24V 120W

DRP024V120W1AA

ATEX ClassIDiv2
Add to Comparison

Output Voltage

24V

Output Current

5A

Input Voltage

85-264 Vac

Dimensions

121 x 50 x 118.7 mm
4.76" x 1.97" x 4.67"

CliQ II 24V 120W

DRP024V120W1BA

Add to Comparison

Output Voltage

24V

Output Current

5A

Input Voltage

85-264 Vac

Dimensions

121 x 50 x 123.1 mm
4.76" x 1.97" x 4.85"

CliQ 24V 120W

DRP024V120W3AA

ATEX ClassIDiv2
Add to Comparison

Output Voltage

24V

Output Current

5A

Input Voltage

320-575 Vac

Dimensions

121 x 70 x 118.4 mm
4.76" x 2.76" x 4.66"
We use cookies to provide the best user experience for those who visit our website. By using this website you agree to the placement of cookies and our Privacy Policy . ACCEPT